Fire Hose Reel Complete 50m Fire Hose

Description

The 50m fire hose reel provides 14 metres of additional hose reach over a standard 36m reel, making it the right choice for large commercial buildings, open-plan warehouses, and floor plates where a standard reel cannot cover the full area from a single mounting point. Under AS 2441, the hose reel must be capable of reaching every part of the floor area it protects — where a 36m reel falls short, a 50m reel closes the gap.

Supplied complete with all parts required for a standard installation. Approved to AS/NZS 1221.

Key Features

• 50m hose — extended reach for large floor areas
• 19mm hose diameter — standard AS/NZS 1221 specification
• 25mm ball valve with nozzle locking device
• Fixed wall-mounted design
• Complete kit — no additional parts required for standard installation

Compliance & Servicing

Fire hose reels must be installed in accordance with AS 2441 and serviced annually in accordance with AS 1851 by a licensed fire protection technician. AS 2441 requires that hose reels be positioned so the hose can reach every part of the floor area being protected, with consideration for the nozzle jet reach as well. Always confirm coverage requirements with your fire protection installer before specifying hose reel length.

Frequently Asked Questions

When to Specify a 50m Fire Hose Reel

• Large commercial buildings with long corridors or open floor plates
• Warehouses and industrial facilities where reel placement is constrained
• Buildings where AS 2441 coverage cannot be achieved with a 36m reel
• Multi-tenancy buildings where reel positioning is fixed and coverage is marginal
• Retrofit installations where a single reel must cover an extended area

Supplied Complete With

• 19mm × 50m fire hose
• 25mm ball valve with nozzle locking device
• Hose guide
• Union
• Wall bracket

How do I know if I need a 36m or 50m fire hose reel?

AS 2441 requires the hose to reach every point of the floor area the reel is protecting. Measure the distance from the reel mounting point to the furthest corner of the area, subtract the effective jet reach of the nozzle (typically 6–8 metres), and the remaining distance is the minimum hose length required. If this exceeds 36 metres, specify a 50m reel. Your fire protection installer or building surveyor can confirm coverage requirements for your specific floor plan.

Can I use a 50m hose reel in place of two 36m reels?

It depends on the floor layout. A single 50m reel can cover a larger area from one mounting point, but if the floor plan has multiple zones or the coverage geometry requires two mounting points to reach all areas, two 36m reels may still be required. AS 2441 specifies maximum travel distances and coverage zones — always confirm the compliance solution with a licensed fire protection installer.

What is the nozzle locking device included with this reel?

The nozzle locking device prevents the ball valve from being opened accidentally or by unauthorised users. It keeps the reel ready for use in an emergency while preventing unintended water discharge. It does not prevent use in a genuine emergency — the lock can be released quickly when needed.

Does the 50m hose reel come with all the parts needed for installation?

Yes — this reel is supplied complete with the 19mm × 50m hose, 25mm ball valve with nozzle locking device, hose guide, union, and wall bracket. A licensed plumber is required to connect the reel to the building’s water supply in accordance with AS 2441.

How often does a fire hose reel need to be serviced?

Fire hose reels must be inspected and serviced annually in accordance with AS 1851 by a licensed fire protection technician. A 6-monthly inspection is also typically required under most commercial building essential services maintenance schedules. Servicing includes checking the hose condition, testing the valve and nozzle, confirming correct water flow and pressure, and verifying reel rotation.