Large Fire Extinguisher Wall Bracket – 4.5kg, 9kg, 7L

Description

A powder coated steel wall bracket for mounting larger fire extinguishers on the wall. Compatible with 4.5kg ABE, 9kg ABE, and 7L wet chemical extinguishers — the standard sizes found in most Australian commercial building installations. Holds the extinguisher securely at the correct mounting height for fast, one-handed removal, keeping it visible, accessible, and off the floor.

Powder coated red finish. 70mm from wall to pin — the wider spacing accommodates the larger cylinder diameters of 4.5kg and 9kg extinguishers. Sold individually. Must be positioned and fixed in accordance with AS 2444.

Key Features

• Powder coated red — durable, highly visible
• 70mm from wall to pin — correct spacing for 4.5kg–9kg cylinder diameters
• Steel construction — strong, long-lasting
• Wall-mount — keeps extinguisher elevated, accessible, off the floor
• Suits 4.5kg ABE, 9kg ABE, 7L wet chemical and equivalent sizes

Technical Specifications

• Dimensions: 70mm from wall to pin
• Finish: Powder coated red
• Suits: 4.5kg, 9kg and 7L fire extinguishers

Compliance & Installation

Fire extinguishers must be mounted in accordance with AS 2444. Fix the bracket to a solid wall surface using appropriate fixings for the wall material — masonry anchors for concrete or brick, structural screws for timber stud walls. Under AS 2444, extinguishers over 4kg should be mounted with the handle no higher than 1.5m from the floor. In practice, mounting the handle at approximately 1.0–1.4m is standard for 9kg units. The extinguisher must be clearly visible and accessible from the main approach direction. Fit an AS 2444 location sign above the bracket if the extinguisher is not immediately visible.

Frequently Asked Questions

Compatible Extinguishers

• 4.5kg ABE dry chemical powder fire extinguisher
• 9kg ABE dry chemical powder fire extinguisher
• 7L wet chemical fire extinguisher
• 3.5kg CO2 fire extinguisher (confirm cylinder diameter fits pin spacing)
• 9L water fire extinguisher
• 9L foam fire extinguisher

What is the difference between the small and large fire extinguisher wall bracket?

The difference is the pin spacing — the small bracket is 45mm from wall to pin (for 2kg, 2.5kg, 2L extinguishers) and the large bracket is 70mm from wall to pin (for 4.5kg, 9kg, 7L extinguishers). The wider pin spacing on the large bracket is needed to accommodate the larger cylinder diameters of 4.5kg and 9kg extinguishers. Using a small bracket on a 4.5kg or 9kg extinguisher would either not fit or not hold the extinguisher securely. If in doubt, confirm the diameter of your extinguisher cylinder before purchasing.

At what height should I mount a 9kg fire extinguisher?

AS 2444 requires that extinguishers over 4kg be mounted with the handle at no more than 1.5m from the floor. In practice, mounting with the handle at approximately 1.0–1.2m is standard for 9kg ABE units — this keeps the extinguisher at a comfortable height for removal without lifting from excessive height, while keeping the base of the unit clear of the floor. Heavier extinguishers are sometimes mounted lower (0.8–1.0m handle height) where the working population includes people with limited lifting height.

Does this bracket suit CO2 and wet chemical extinguishers as well as ABE?

The large bracket suits any extinguisher whose cylinder diameter fits within the 70mm pin spacing. For 3.5kg and 5kg CO2 extinguishers (which have narrower aluminium cylinders), the small bracket may be a better fit — confirm the cylinder diameter. The 7L wet chemical extinguisher typically has a similar cylinder diameter to a 4.5kg ABE and fits the large bracket. If you are replacing an existing bracket, the easiest approach is to measure the diameter of the cylinder on your extinguisher and confirm against the bracket specification.

Does the bracket come with the extinguisher?

No — the bracket is sold separately. Most new Flamestop extinguishers in the 4.5kg and 9kg range include a wall bracket. This bracket is sold as a spare, additional, or replacement unit where the original has been lost or damaged.

Can this bracket be used outdoors?

The powder coat finish provides reasonable durability in sheltered outdoor locations. For direct weather exposure, consider a UV-treated plastic cabinet or extinguisher cover to protect both the extinguisher and the bracket. Inspect the bracket at each 6-monthly AS 1851 service for corrosion, particularly at the mounting hole edges and pin.