Swing Arm Fire Hose Reel 19mm x 36m with Flexi Pipe

Description

A 19mm × 36m swing arm fire hose reel with a flexible pipe connection to the water supply. The swing arm mechanism allows the reel drum to pivot outward from the wall, directing the hose toward the fire before deployment — reducing drag, preventing kinking, and allowing the hose to reach both sides of the installation point. The flexible pipe connection replaces the standard rigid inlet pipe, allowing the reel to be installed in positions where routing solid pipework directly to the reel is impractical — angled surfaces, confined wall spaces, awkward existing pipe routing, or retrofit installations where the supply pipe cannot be aligned directly with the reel inlet.

All installation components included: 19mm × 36m fire hose, ball valve, hose guide, union, and swing arm wall bracket. The 36m hose length meets the minimum coverage requirement for most commercial buildings under AS/NZS 1221.

Key Features

• Swing arm mechanism — pivots outward for directional deployment
• Flexible pipe connection — suits awkward or retrofit supply configurations
• Complete kit — all components included, ready to connect
• 19mm × 36m hose — meets AS/NZS 1221 minimum coverage requirements
• Ball valve with nozzle locking device included

What’s Included

• 1 × 19mm × 36m fire hose
• 1 × Ball valve with nozzle locking device
• 1 × Flexible pipe connection
• 1 × Hose guide
• 1 × Union
• 1 × Swing arm wall bracket

Compliance & Servicing

Installation must comply with AS 2441 by a qualified fire protection installer and licensed plumber. The flexible pipe connection must be rated for fire suppression water supply use and inspected at each AS 1851 service interval. Under AS 2441, the flexible connection must be fully accessible for inspection and maintained in a condition that does not restrict flow. Replace the flexible pipe at the first sign of cracking, kinking, or restriction. 6-monthly inspection and annual full service by a licensed fire protection technician are required.

Frequently Asked Questions

Where the Flexi Pipe Connection Is Specified

• Retrofit installations where existing pipe routing cannot be aligned with the reel inlet
• Walls with an angle or recess that makes rigid pipe connection awkward
• Locations where the water supply pipe emerges at a different height or position than the reel inlet
• Commercial fit-outs where the reel position is fixed but the pipe supply cannot be rerouted
• Any installation where a rigid elbow or short-run rigid pipe would be difficult to fit

Which Swing Arm Variant?

• Standard swing arm — rigid inlet pipe; for new installations where pipework can be run directly to the reel inlet position
• Swing arm with flexi pipe (this product) — flexible inlet connection; for retrofit or awkward supply positions where rigid alignment to the reel inlet is not achievable
• Swing arm with cabinet — swing arm reel enclosed in a steel cabinet; for outdoor or exposed environments requiring weather and tamper protection

When would I use a flexi pipe connection instead of a standard rigid connection?

Use the flexi pipe model when the water supply pipe emerges from the wall or slab at a position that can’t be precisely aligned with the rigid reel inlet — which is the more common scenario in retrofit and upgrade work where pipework predates the reel position. In new construction where the plumber runs the supply pipe specifically to the reel, a rigid connection is fine and preferred. In older buildings where the reel is replacing an older unit and the supply stub-out is off-centre, at the wrong height, or at an angle, the flexible connection absorbs the misalignment without needing to reroute pipework.

Does the swing arm mechanism change the installation requirements?

The wall bracket, hose guide, and water connection requirements are the same as a fixed reel — the swing arm mechanism is the reel drum mounting only. Under AS 2441, the reel must be positioned so the hose can reach all parts of the protected area and the swing arm pivot must be clear of obstructions that would prevent the drum from swinging to full deployment angle. The licensed installer will confirm clearances as part of the AS 2441 compliance assessment.

What is the advantage of a swing arm over a fixed reel?

A fixed reel deploys the hose in one direction only — straight out from the wall. A swing arm allows the drum to pivot outward, facing the hose toward the fire before pulling it out. This reduces hose drag at the wall mount point, prevents kinking at the guide, and maximises effective reach on both sides of the installation point. In corridors, stairwells, and open-plan floors with multiple approach angles, a swing arm meaningfully improves the usability of the reel in an emergency. It can be used as a drop-in replacement for any fixed reel position.

How often does the flexible pipe connection need to be inspected?

At every AS 1851 service interval (6-monthly). The technician will check the flexible pipe for cracking, kinking, abrasion, and secure connection at both ends. A flexible pipe that shows any sign of deterioration — rubber cracking, visible wire reinforcement, or any deformation — must be replaced before the reel is returned to service. Do not wait for the annual service if a problem is noticed; replace immediately.

Is this reel suitable for outdoor installation?

The standard swing arm reel is designed for indoor commercial installation. For outdoor or exposed environments, the swing arm with cabinet variant is the appropriate choice — the cabinet protects the reel drum, hose, and fittings from UV, rain, and temperature extremes. Without enclosure, outdoor UV exposure will degrade the hose material and the valve seals over time, leading to premature failure and shortened service intervals.