Directional Arrow Safety Sign Green Safety

Description

A directional arrow safety sign in UV-rated PVC plastic — green with white arrow symbol, 145mm wide × 110mm tall. Used to indicate the direction of emergency exits, escape routes, assembly points, or safety equipment locations where a directional cue is needed in addition to the primary location sign. The small, compact format is designed to supplement other fire safety signs — providing a visual pointer that guides occupants along an evacuation route or toward equipment they cannot see directly from their current position.

In buildings with complex floor plans, multiple stairwells, or long corridors with several turns, directional arrows are installed at each decision point along the evacuation route. An occupant following “Emergency Exit” signs through a building needs a clear arrow at each turn or intersection to maintain orientation. The green arrow is the universal emergency wayfinding colour in Australia, consistent with the emergency exit sign format used throughout the building.

Where to Use

• Corridor intersections and floor level changes on evacuation routes
• Directing to fire extinguisher locations around corners or behind obstructions
• Supplementary directional cues below or adjacent to exit signs
• Assembly point direction from building entrances and car parks
• Industrial facilities with non-obvious egress routes
• Multi-tenancy buildings where the evacuation route changes by floor or zone

Key Features

• 145mm × 110mm format — compact size for use as a supplementary directional sign
• Green field with white directional arrow — consistent with emergency exit sign colour standard
• UV-rated PVC plastic — resists fading over the life of the installation
• Durable plastic construction — suitable for high-traffic corridor locations

Compliance & Placement

Directional signs supplement the emergency exit signage system required under AS 2293.1 and the NCC. AS 2293.1 requires that the evacuation route is clearly identified from any point in the building to the nearest exit — directional arrows are used where the exit is not directly visible and a navigational cue is required. Mount at eye height or consistent with the height of adjacent exit signs — typically 1,800–2,200mm from floor level — at each point where the evacuation direction is not obvious. At each AS 1851 service, confirm all directional signs are present, correctly oriented, and legible.

Frequently Asked Questions

When do I need a directional arrow in addition to an exit sign?

An exit sign marks the exit door location. A directional arrow is needed at any point along the evacuation route where the next step toward the exit is not obvious — a corridor T-junction, a turn at the end of a passage, or a stairwell entrance that is out of sight from the current position. Under AS 2293.1, the principle is that a person unfamiliar with the building should be able to navigate from any occupied point to an exit by following the signs without needing prior knowledge of the layout. Wherever a navigational decision is required, a directional arrow resolves ambiguity.

Can the directional arrow be used for fire extinguisher directions?

Yes — a directional arrow can be used to guide people toward a fire extinguisher that is located around a corner or behind an obstruction, supplementing the extinguisher’s location sign. This is common in large warehouses or industrial facilities where equipment is spread across a large floor plan. Mount the arrow at the nearest visible point on the approach path, oriented toward the extinguisher location. Pair with the appropriate location sign (SILM, SILL) at the extinguisher itself.

What if I need the arrow pointing in a specific direction?

The SIEARROW is a single directional arrow — confirm the arrow orientation before ordering to ensure it points in the required direction. For installations requiring arrows pointing in multiple directions (left, right, straight ahead), multiple signs may be required, or a sign with the appropriate pre-set direction. Check the product listing for available orientations. For complex wayfinding requirements, your fire protection installer or building consultant can advise on the correct sign layout for your evacuation route plan.

Does a directional arrow sign substitute for an illuminated exit sign?

No — this is a non-illuminated PVC plastic panel. Under AS 2293.1, emergency exit signs at exit doors must be illuminated. Directional arrows used as supplementary navigational signs may be non-illuminated in locations with adequate emergency lighting, but the primary exit sign at the exit door must comply with the illuminated standard. Confirm with your fire protection installer whether illuminated directional signs are required for your specific building and evacuation route configuration.

How often should directional signs be checked?

At each AS 1851 scheduled service, confirm that all directional signs are present, correctly positioned, undamaged, and pointing in the correct direction. In buildings where layout changes or partition modifications have altered the evacuation route, update the directional signage to reflect the current correct path. An arrow pointing the wrong direction after a building fitout change is worse than no arrow — it actively misdirects evacuating occupants.